Bộ điều khiển WGK-31-607 ELECNOVA Việt Nam là giải pháp bù tự động chuyên dùng với nhà máy lắp đặt Solar áp mái. Bộ điều khiển tự động điều khiển đóng/ cắt tụ theo công suất phát của solar.
Tính năng nổi bật như sau:
- Đo lường và hiển thị các thông số điện như điện áp, dòng điện, công suất, hệ số công suất, sóng hài...
- Màn hình màu 5 inch, cảm ứng, dễ dàng giám sát các thông số, cài đặt thông số
- Tự động điều khiển đóng/cắt tụ bù theo công suất phát của solar. • Lựa chọn với nhiều phương án số bước tụ 16 hoặc 21 hoặc 24
- Cảnh báo và bảo vệ khi hệ thống gặp sự cố (quá áp, thấp áp, sóng hài...).
- Ghi lại sự kiện (SOE) giúp theo dõi và phân tích hoạt động của hệ thống.
- Truyền thông Modbus-RTU để kết nối với hệ thống giám sát từ xa.
Bảng thông số kỹ thuật chi tiết:
Specifications |
16A-F |
21A-F |
24B-F |
16A-G |
21A-G |
24B-G |
Real-time measurement |
Three-phase phase voltage, three-phase line voltage |
One-phase line voltage |
Three-phase current |
One-phase current |
Three phases of active power, always active power |
Always meritorious |
Three-phase reactive power, total reactive power |
Total reactive power |
Three-phase appearance, total appearance |
Total apparent |
Three-phase power factor, total power factor |
Total power factor |
Frequency, Temperature |
Frequency, Temperature |
Photovoltaic current, photovoltaic active power |
Harmonic measurement |
1-31 times |
Wiring mode |
Three-phase four-wire |
One phase two wires |
Number of control paths |
16 |
21 |
24 |
16 |
21 |
24 |
Driving mode |
A: static B: dynamic |
Compensation scheme |
Combined compensation |
Total compensation |
Control strategy |
Cycle switching, steady state cycle |
Event Logging |
50 items |
Alarm output |
The output contact capacity of the 2-way programmable relay is AC250V / 3A DC30V / 3A |
thermometric |
The NTC temperature measuring sensor is 3 meters |
communication |
The 1-way RS485 M0DBUS-RTU protocol |
USB disk function |
Optional USB disk export measurement data function |
Display mode |
5-inch color touch screen |